
















-0 %

















1.85cc single-cylinder double acting vertical steam engine with 200ml boiler model
This product qualifies for free shipping
Free shipping over 50 dollars
1.85CC Single-cylinder Double Acting Vertical Steam Engine with 200ml Boiler Model
Features:
.Material: Copper
.Type: Vertical Single-cylinder Double-acting Steam Engine Model
.Displacement: 1.85CC
.Recommended Air Pressure: 0.4MPa-0.6MPa
.Bore: 14mm
.Stroke: 12mm
.Air Inlet Thread: 1/4-40TPI
.Product Dimensions: 11 x 9 x 10cm
.Product Weight: 1000g
.Package Dimensions: 15 x 13 x 15cm
.Package Weight: 1200g
.Packing: Carton Box
.Ages: 14+
Features:
.You will find it difficult to take yourself away from the beautiful and portable steam model since it is so simple to set up and play with in your hands.
.The premium quality model, which is mostly made of brass and has undergone CNC machining, offers a rich-in-luster, delicate, and aesthetically pleasing surface for fine manufacturing, sophisticated technology, and smooth operation. To ensure long-term operation, the primary shaft sleeve is made of highly hardened, abrasion-resistant beryllium copper.
.The installed steam engine and boiler are fuss-free and simple to use, allowing customers to instinctively experience the appeal of the steam engine.
.Suitable for steam engine lovers, the operable engine model can be used to develop hands-on skills and instruct young people or students on how steam engines work.
Operate the steam model, which features an exceptionally valuable collection for both production technology and appearance, to have a more intuitive understanding of how it works.
Instructions: 1. To turn steam energy into mechanical work, a steam engine uses a reciprocating power source.
2. Before using the nose, lubricating oil should be applied to each point of friction. Fill the boiler with water, then heat it until it boils. Next, gradually spin the flywheel until it starts operating on its own. (If getting stuck, it's possible that 1) the pressure is insufficient, 2) the lubrication of the cylinder and piston is insufficient, and 3) the cylinder and piston operating is improper.)
3. Fully Equipped: The sophisticated steam boiler model has a main valve, a pressure gauge, a water level meter, a waste water tank, etc. It also has a stunning appearance and dependable performance.
.Well-made: The boiler is made of pure copper and has mahogany on the surface for excellent heat insulation. designed with interfaces set out for additional accessories on both the chimney interface and the side interfaces.
High Efficiency: This reliable model has an extremely high heat rate! The pipe, which is heated by combustion, permits air pressure to reach 0.4 MPa in roughly 8 minutes. The pressure relief valve assures operational safety with a pressure of 0.5 MPa and a maximum working time of 25 minutes.
Applications: For collectors and steam model aficionados, the model is a beautiful piece of historic art. The model, suitable for 1.0-1.5m model steam boats, can easily drive a triple-cylinder steam engine and be utilized for racing boats.
Instructions: Fill the container with water until it is 3/5 full, and then maintain a pressure of roughly 0.4 MPa. Keep an eye on the burning time (water must be added), then after usage, drain the leftover water. The usage of the boiler is safer and you can save gas when combined with a good fire control system. Butane gas works well as a fuel for the boiler.
Specifications:.Material: Copper
.Type: Vertical Single-cylinder Double-acting Steam Engine Model
.Displacement: 1.85CC
.Recommended Air Pressure: 0.4MPa-0.6MPa
.Bore: 14mm
.Stroke: 12mm
.Air Inlet Thread: 1/4-40TPI
.Product Dimensions: 11 x 9 x 10cm
.Product Weight: 1000g
.Package Dimensions: 15 x 13 x 15cm
.Package Weight: 1200g
.Packing: Carton Box
.Ages: 14+
- Stock: In Stock
- Model: 10157
- SKU: 1-85cc-single-cylinder-double-acting-vertical-steam-engine-with-
1432 samples sold
$799.99
$799.99
Ex Tax: $799.99