
















-0 %

















fid racing voltz 1/5 high-speed rc electric 4wd off-road simulation desert crawler vehicle 100km/h (no remote controller battery charger)
This product qualifies for free shipping
Free shipping over 50 dollars
FID RACING VOLTZ 1/5 High-speed RC Electric 4WD Off-road Simulation Desert Crawler Vehicle 100KM/H (No Remote Controller Battery Charger)
Features:
Specifications:
.Color: White
.Material: Metal + Plastic
.Scale: 1:5
.Wheelbase: 620mm
.Max Ground Clearance of Chassis: 120mm
.Tire Size: 230 x 85mm
.Battery Compartment Size: 190(L)x75(W)mm (height unrestricted)
.Shock Absorption: All-metal twisted teeth are equipped with 4 all-metal hydraulic dampers at the same time
.Spare Tire Size: 190 x 75mm
.Motor: 680KV sensorless brushless motor is recommended (not included)
.Dimensions: 74/120mm
.ESC: 300A sensorless brushless ESC (maximum support 6-8S) is recommended (not included)
.Steering Servo: all-metal double steering gear 130KG is recommended (not included)
.Chassis: All aluminum Alloy 5mm U-shaped chassis
.Front Suspension: All-metal independent suspension system
.Rear Suspension: All-metal four-link integral bridge suspension
.Drive Mode: Four-wheel drive
.Differential: The whole car is equipped with three all-metal differentials.
.Product Dimensions: 87.8 x 54.5 x 42.3cm
.Product Weight: 20000g
.Package Dimensions: 90 x 57 x 35cm
.Package Weight: 24000g
.Packing: Carton Box
Package Content:
.1 x RC Car
.1 Set x Sticker
Features:
.It has a 300A brushless ESC and a 4-level 74/120 size brushless motor. As of right now, it works with 8S batteries. Both the brushless motor and the ESC have an all-aluminum alloy shell (customised version).
The entire vehicle is outfitted with four all-metal dampening systems and four all-metal hydraulic dampers, which encourage a more stable and smooth walking posture for the vehicle at high speeds.
The frame structure stabilises the entire body using a variety of aluminium alloy components, and each component is made to be lightweight.
.High-carbon steel spiral bevel gear gearbox with a 1.5-meter gear module is used for the front and rear main gearbox. Three all-metal differentials are used throughout the entire car. Each gear has undergone heat treatment and tempering. They are all created and completed using CNC technology to guarantee accuracy. cups for gearbox The internal differential bevel teeth of the differential are composed of high-strength powder technology, and the spring steel material is blackened.
All of the drive shafts for FID VOLTZ vehicles are precisely machined using multi-axis equipment. The rear wheels are driven by a spline with a maximum diameter of 25mm, the rear wheels are driven by a telescopic universal joint, and the front wheels are in the shape of CVDs. 5mmPIN higher.
In order to increase the strength to 130KG and support voltage 7.4V, FID VOLTZ employs two huge 65KG all-metal steering gear steering combinations. The steering system is also very flexible.
Every VOLTZ vehicle has a specific chassis number. FID VOLTZ05E0156 is the number shown in the image above. Model name FIDVOLTZ, frame ratio 05, E for electric version, 0156 for frame number make up the numbering system.
Two shock absorbers and two hydraulic dampers are part of the front wheel suspension group, which uses an all-metal swing arm.
Red customized.300A non-inductive brushless ESC with maximum compatibility for 6S to 8S battery series.
.The vehicle has a 74/120 size rear motor, which improves the balance between the front and back ratios. An ESC provides direct power to a dual fan heat dissipation system that cools the motor.
The all-metal shock absorbers, all-metal knife arms, and two hydraulic dampers make up the rear wheel four-link suspension system.
The rear-wheel drive uses a central drive shaft device, an integral all-metal rear axle, a built-in differential, a half-shaft drive, a tyre lock with five positions and a five-point positioning system.
The body is unnaturally full despite the decent architectural structure of the entire vehicle. Beautifully crafted, with a front and rear suspension system and 230*85mm luxury tyres.
The U-shaped chassis with a 5 mm form improves the body's overall strength. The chassis is illuminated by the all-metal knife arm, integral rear axle, and swing arm.
.Transparent vehicle shells, white car shells, and gun-gray car shells are available as options for consumers to select from, along with stickers. A remote control, battery, and charger must all be purchased separately by players.
For Ages 14 and Up
Specifications:
.Color: White
.Material: Metal + Plastic
.Scale: 1:5
.Wheelbase: 620mm
.Max Ground Clearance of Chassis: 120mm
.Tire Size: 230 x 85mm
.Battery Compartment Size: 190(L)x75(W)mm (height unrestricted)
.Shock Absorption: All-metal twisted teeth are equipped with 4 all-metal hydraulic dampers at the same time
.Spare Tire Size: 190 x 75mm
.Motor: 680KV sensorless brushless motor is recommended (not included)
.Dimensions: 74/120mm
.ESC: 300A sensorless brushless ESC (maximum support 6-8S) is recommended (not included)
.Steering Servo: all-metal double steering gear 130KG is recommended (not included)
.Chassis: All aluminum Alloy 5mm U-shaped chassis
.Front Suspension: All-metal independent suspension system
.Rear Suspension: All-metal four-link integral bridge suspension
.Drive Mode: Four-wheel drive
.Differential: The whole car is equipped with three all-metal differentials.
.Product Dimensions: 87.8 x 54.5 x 42.3cm
.Product Weight: 20000g
.Package Dimensions: 90 x 57 x 35cm
.Package Weight: 24000g
.Packing: Carton Box
Package Content:
.1 x RC Car
.1 Set x Sticker
- Stock: In Stock
- Model: 10094
- SKU: fid-racing-voltz-1-5-high-speed-rc-electric-4wd-off-road-simulat
295 samples sold
$2,499.99
$2,499.99
Ex Tax: $2,499.99